Operation Manual

Machine Setting

Pattern: D1 (Mode 1)

Thread tension:2-6

Presser foot: Rolled hem foot D

Foot pressure: 3

To sew:

Fold the edge of the fabric twice, 6 cm (2 - 3/8”) in

length and 0.3 cm (1/8”) in width.

Trim the corner 0.5 cm (3/16”) by 0.8 cm (1/4”) for

easier insertion of the hem into the foot.

1 Wrong Side of the Fabric

2 0.5 cm (3/16”)

3 0.8 cm (1/4”)

4 Curl of the Foot

Place the fabric aligning the edge of hem with the

guide on the foot.

Lower the foot and sew to 1-2 cm (1/2”-1”) while

pulling both thread to the back.

Stop the machine and lower the needle into the

fabric.

Raise the foot and insert the folded portion of the

fabric into the curl of the foot.

Lower the foot, and then sew by lifting up the edge of

the fabric to keep it feeding smoothly and evenly.

Rolled Hem