Operation Manual

47
NOTE:
The stitch widths of patterns 40 (3.5 mm) and 41 (2 mm) are
fixed, but the needle drop position will move to the left or to
the right by pressing the stitch width adjusting button.
Quilts can be more attractive and artistic by adding
applique.
1
2
3
You can tack thick quilt layers together with the clasp stitch.
Select pattern 73 and press the memory button.
Press the locking stitch button.
Lower the presser foot and start sewing. The machine
will automatically stop after sewing one unit of the pattern.
Raise the presser foot and move the fabric to the next
position.
Machine Setting
Pattern: 73 (Mode 2)
Thread tension:3-6
Presser foot: Satin Stitch foot F
Foot pressure: 2-3
Machine Setting
Pattern: 35-41 (mode 2)
Thread tension:1-4
Presser foot: Satin Stitch foot F or Craft foot F2
Foot pressure: 2
Clasp stitch
Applique
Place an applique on the fabric and baste it in place or use
a fusible web to secure the applique in place.
Guide the applique fabric, so that the needle falls off the
edge of the applique when the needle swings to the right.
1 Applique
2 Edge of the Applique
3 Craft foot
40
41