Operation Manual

Pull the buttonhole lever down as far as it will go.

1 Buttonhole lever

NOTE:

If you start sewing without pulling down the buttonhole

lever, the LCD screen will show a warning and the

machine will stop after a few stitches. Pull the buttonhole

lever down and start sewing.

NOTE:

Make sure there is no gap between the slider and front

stopper, otherwise the left and right lengths will be

different.

6 Slider

7Front stopper

8Sewing gap

9 Starting mark

Insert the corner of the fabric under the foot. Press

the up/down needle button twice.

Remove the fabric to the left to draw the needle

thread through the hole of the foot.

Place the garment under the foot, and lower the

needle at the starting point of the buttonhole mark.

Then lower the automatic buttonhole foot R.

2 Buttonhole mark

3 Needle thread

4 Bobbin thread

5 Starting point