Operation Manual

52
5
6
7
9
10
5 Start the machine to sew the buttonhole.
The buttonhole will be automatically sewn.
Step 1: The machine will sew the front bartack and
the left row first.
Then it goes back to the starting point with
straight stitch.
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back bartack, and
the machine will stop automatically.
To sew another buttonhole, press the thread cutter
button and raise the presser foot. Move the fabric to
where the next buttonhole to be sewn, then lower the
foot and start the machine.
NOTE:
After selecting the buttonhole, press the thread
cutter memory button. LED lights on. The thread will
be cutt off automatically after finishing sewing.
When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
Remove the fabric and place a pin just below
the bartack at each end to prevent accidentally
cutting stitches. Cut the opening with the seam
ripper.
9 Seam Ripper
NOTE:
When snapping off the buttonhole foot, move up the
dual feed device for an easy access to the red button.
10 Dual Feed Device
n
m
Step 1
Step 2
Step 3