Operation Manual

Automatic buttonhole

Machine Setting

Pattern: 15(Mode 3)

Thread tension:1-5

Presser foot: Automatic Buttonhole foot R

Foot pressure: 3

Pull the button holder of the buttonhole foot all the

way out.

Insert the fabric under the foot. Press the up/down

needle button twice.

Remove the fabric to the left to draw the needle

thread through the hole of the foot.

Insert the garment under the foot, and lower the

needle at the starting point.

Then lower the automatic buttonhole foot R.

1 Button Holder

2 Needle Thread

3 Bobbin Thread

NOTES:

You do not need to pull down the buttonhole lever.

If you wish to change the buttonhole width and

density press the stitch width and length buttons.

If there is a difference in stitch density between the

right and left rows of the buttonhole, refer to page

86 for correction.

If you wish to sew a buttonhole longer than the size

permitted by the automatic buttonhole foot R, use

satin stitch foot F or buttonhole foot B (optional

item).