Operation Manual

Darning

Machine Settings

Pattern: 21 (Mode 3)

Thread tension: 3-6

Presser foot: Automatic Buttonhole foot R

Foot pressure: 3

The LCD screen shows the sewing instructions when

selecting patteren 21.

Pull the button holder to the rear.

Place the garment under the foot.

Press the up/down needle button twice. Remove the fabric

to the left to draw both threads under the foot and place

the fabric back under the foot.

Lower the needle at the starting point then lower the foot.

1 Button Holder

2 Starting Point

Depress the foot control and the machine will sew a

darning 2 cm (3/4”) long and stop automatically.

Repeat sewing in the different direction until the darning

covers the rip or hole.

NOTE:

The maximum size of darning is 2 cm (3/4”) long and 0.7

cm (1/4”) wide.

3Maximum Length 2 cm (3/4”)

4 Maximum Width 0.7 cm (1/4”)