Operation Manual

Blind Hem

Machine Settings

Pattern: 06 (Mode 3)

Thread tension:1-4

Presser foot: Blind Hem foot G

Foot pressure: 3

Select pattern 07 for woven fabrics or pattern 05 for

elastic fabrics.

NOTE:

The stitch width of patterns 06 and 07can not be changed,

but the needle drop position will move.

How to fold the fabric

Fold the fabric to make a hem as shown.

1 Heavy Fabric

2 Fine to Medium Fabric

3 0.4 -0.7 cm (3/16”-1/4”)

4 Overcasted Edge of Fabric

5 Wrong Side of Fabric

To sew

Position the fabric so that the fold comes to the left side of

the guide on the foot.

Lower the presser foot.

Adjust the position of the needle swing with the stitch

width adjusting button so that the needle just pierces the

folded edge of the fabric when the needle comes over to

the left side.

Sew guiding the fold along the guide.

4 Guide on the Foot

5 Fold

Open the fabric with the right side up.

The stitches on the right side of the fabric is almost

invisible.

6 Right Side of the Fabric