Operation Manual

79
Shift the cursor to the right of the last programmed
pattern.
Press the stitch width adjusting button to alter the stitch
width.
Uniform stitch adjustment (Modes 2 and 3 only)
The stitch width and length of the programmed stitch
patterns can be uniformly altered.
1
2
(1) (2) (3) (4)
Example 1: To alter the stitch width of the programmed
patterns 41 and its mirror image in the
Mode 3.
NOTE:
Stitch length can be uniformly altered when patterns of
the same category (satin stitches or stretch stitches) have
been programmed.
Start sewing. The programmed patterns will be sewn in the
uniform width.
1 Default Width
2 Uniformly Altered Width
Unified needle drop position:
The needle drop position of the programmed patterns will
vary depending on the pattern combination:
(1) Unified to the left when combining the patterns with the
left needle position and the center needle position.
(2) Unified to the right when combining the patterns with
the center needle position and the right needle position.
(3) Unified to the center when combining the patterns with
the left needle position and the right needle position.
(4) Unified to the center when combining the patterns with
the left, center and right needle positions.
EDITING (2)