Operation Manual

81
Custom stitch adjustment (Mode 2 and 3 only)
The stitch width and length can be individually altered for
each pattern in the programmed combination.
Example: To alter the stitch width and length of
a single pattern 73 in the combination.
Press the Edit button to shift the cursor under the
pattern you wish to alter.
Press the stitch width adjusting button to reduce the
width to “5.0”.
NOTES:
To view the stitch setting of each pattern, shift the cursor
under the desired pattern then press the stitch width or
length adjusting button. The settings will be displayed at
the bottom center of the LCD screen.
If you press the stitch width or length adjusting button
when the cursor is on the right of the last programmed
pattern, a custom adjustment will be cancelled and
uniform adjustment will be applied.
z
x
c
z
x
c