Operation Manual

82
A pattern combination will be kept in the memory for future
use even after turning the machine off.
The stored pattern combination can be recalled by
pressing the memory/recall button.
You can store up to 5 combinations in mode 2 and mode 3
individually.
To store a pattern combination
Program a pattern combination.
Press the recall button. An hourglass will
appear for a while and the pattern combination will
be stored.
: Turn over button
: Memory button
: Clear button
Press the memory button.
* The machine beeps and an hourglass appears on
the LCD screen while the machine is saving the
stitch pattern combination.
Do not turn the power switch off while the machine is
beeping.
*You can access other memory address (M2 to M5) by
pressing the stock/call key.
*To exit from the stock/call mode, press any key except
the memory, clear, turnover memory, edit or help key.
Overwriting a stored combination
Program the desired combination.
Press the stock/call key to select the desired memory
address. The LCD screen will show the pattern
combination already stored.
Press the memory key and the stored combination will
be replaced with the new combination.
z
x
c
z
x
c
z
x
c
z
x
c
TO STORE AND CALL STITCH PATTERN
COMBINATIONS
q
w
e
q
w
e