Operation Manual

24
To Use Needle Threader
z Raise the needle to its highest position.
Pull down the needle threader as far as it will go.
x Turn the knob in the direction of the arrow in the
illustration, then insert the hook q into the needle
eye.
Read the thread around guide w and under the
hook q.
q Guide
w Hook
c Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through the
needle.
v Pull the thread through the needle eye.
* The needle threader can be used with a #11 to
#16 needle or a Blue tip needle.
Thread size 50 to 100 should be work well.
z
x
c
v
Pressure Adjusting Dial
The pressure dial should be set at 3 for regular sewing.
Reduce the pressure to 2 for applique, cutwork, drawn
work, basting and embroidery. Set the pressure to “1”
when sewing chiffon, lace, organdy and other fabrics.
Velours and knits with a lot of stretch may require at 1
setting. Alingn the setting mark on the dial with the
desired number.
w
q