Operation Manual

1. With the buttonhole foot raised, hook the cord on

the cord spur at the back of the buttonhole foot.

Spur

2. Bring the ends toward you under the buttonhole foot

until they clear the front end.

3. Hook the filler cord into the forks on the front of foot

R to hold them tight.

4. Lower the needle into the garment where the

buttonhole will start and lower the foot.

5. Depress the foot control gently and sew the

buttonhole.

Each side of the buttonhole and the bartacks will be

sewn over the cord.

6. Remove the fabric from the machine and cut the

sewing threads.

7. Pull the left end of the filler cord to tighten it.

8. Thread the end through a darning needle, draw to

the other side of the fabric and cut.

Corded Buttonhole

* Set the stitch width in accordance with the thickness

of the cord used.

* To cut the opening and to reset for sewing the next

buttonhole, refer to the instructions on pages 46 and

48 .

q Stitch selector:

w Presser foot: R:Automatic buttonhole foot

e Thread tension: 1 – 5

r Stitch length: 0.5 – 1

t Stitch width: 5

qwe