Integration Guide

P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
5
General Information iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 1
Banknote Fitness Requirements
Primary Features
The iVIZION2 Series of Banknote Validator 
contains the following primary features:
• The iVIZION2 Unit is backwards compatible with
all previous iVIZION Series Unit. Upgrade of the
current iVIZION Unit to the new iVIZION2 Unit
can be accomplished by just replacing the
Validator.
• Fastest “Bill to Bill” processing speed; 1.5 seconds
or faster.
• Advanced Contact Image Sensor (CIS) provides
100% Banknote RBG-full-color-image capture.
• Longer Product lifetime; 5 years or 1 million
Banknotes.
• Direct firmware downloads from a PC via USB
connection.
• Strengthened compatibility with FUZION
®
technology.
CAUTION
The following Banknote types may
not validate correctly, or worse, can
cause a Banknote jam and/or damage
to the Unit’s Transport Path, and
should be avoided:
• Torn
• Worn
• Taped
• Excessive folds or wrinkles
• Dirty
• Wet and/or Oiled
• Adhering foreign objects
• Excessive miscuts, misaligns and/or misprints
Figure 2 Unacceptable Banknotes
Figure 2 Unacceptable Banknotes
Damaged or Taped Banknotes
Wrinkled or Folded Banknotes
Curled, Folded or Partial Banknotes
Dirty Banknotes
Wet or Oiled Banknotes
CAUTION: For 12V DC users, confirm
your power supply capacity before
upgrading from your iVIZION Unit to
the iVIZION2 Unit. The Current Limit
Mode is available in order to control
current consumption and, however,
this affects the processing speed (refer
to “Technical Specifications” on
page 8, “Electrical Specifications” on
page 10 and “Connector Pin
Assignments” on page 15 for details).
NOTE: The consumable items are not
included.