Integration Guide

Troubleshooting iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 8
P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
37
Green
Flashes
(3)
Reserved - -
Green
Flashes
(4)
Start/Stop Bit Detection Error
A start or stop bit of a Barcode
Ticket cannot be detected
• Check that a proper Barcode Ticket
is used.
• Check that the Barcode Ticket is not
damaged or looks unnatural
(abnormal printing, etc).
• Check that the relative Part(s) are
properly assembled and/or Harness
are connected.
• Clean and calibrate the relative
Sensor(s).
• CIS
• MGU Gear
• Belts of the Validator
• Motors of the Validator
Green
Flashes
(5)
Character Detection Error
Unable to detect a Barcode Ticket
character
• Check that a proper Barcode Ticket
is used.
• Check that the Barcode Ticket is not
damaged or looks unnatural
(abnormal printing, etc).
• Check that the relative Part(s) are
properly assembled and/or Harness
are connected.
• Clean and calibrate the relative
Sensor(s).
• CIS
• MGU Gear
• Belts of the Validator
• Motors of the Validator
Green
Flashes
(6)
Reserved - -
Green
Flashes
(7)
Reserved - -
Green
Flashes
(8)
Double Ticket Error
Two or more overlapping Barcode
Tickets were inserted
• Check that two or more Barcode
Tickets are not overlapped.
• Insert the Barcode Ticket properly.
• Barcode Ticket
Green
Flashes
(9)
Reserved - -
Green
Flashes
(10)
Reserved - -
Green
Flashes
(11)
Upside-Down Insertion
A Barcode Ticket was inserted
upside-down
• Insert a Barcode Ticket having its
Barcode side facing up.
• Insertion Direction of the
Barcode Ticket
Green
Flashes
(12)
.
.
.
(15)
Reserved - -
Table 25 LED Reject Codes; Barcode Ticket (Continued)
Status LED Error Solution Relative Part/Sensor