User's Manual

H-7YCPD0002-0 EDITION 1
39
NOTE
P1 and P2 talk groups cannot be locked out.
The default emergency and emergency-capable talk groups can be locked out if they are
NOT in an emergency state. If a talk group is locked out and is subsequently changed to the
currently selected talk group, it will automatically be unlocked by the radio so the user can
hear calls on the talk group. The radio may be configured so all talk groups are
automatically locked out by default. In this case, they must be manually unlocked, if
desired.
7.22.1 Lock Out a Talk Group
1. Use to scroll through the menu until “LockOutMenu” appears in the bottom line
of the display. The name of a talk group in the currently active profile will appear in the
top line.
2. Use to scroll through the list of talk groups, if any, until the desired talk group for
lock out appears in the top line of the display.
3. Press the MENU button to lockout the displayed talk group. A less than symbol (<)
appears next to the talk group‟s name.
4. Repeat steps 2 and 3, as needed, to lockout additional talk groups.
The dwell display will re-appear a few seconds after button presses end.
While scrolling through talk groups in the active profile, the only talk groups that appear in
the “LockOutMenu” are those in the active profile.
7.22.2 Unlock a Talk Group
1. Use to scroll through the menu until “LockOutMenu” appears in the bottom line
of the display. The name of a talk group in the currently active profile will appear in the
top line.
2. Use to scroll through the list of talk groups, if any, until the talk group desired for
unlocking appears in the top line of the display. A less-than symbol (“<”) appears next to
the name of a talk group that is currently locked out.
3. Press the MENU button to unlock the talk group. The less-than symbol (“<”) next to the
name of the talk group disappears. The dwell display appears as soon as the radio
acknowledges the selection.
NOTE
Changing the active profile removes any lockouts you have made.
Turning off the radio removes any lockouts you have made.