User's Manual

H-7YCPD0002-0 EDITION 1
41
7.23.2 Scanning Priority
The following lists the scanning priority order (from highest to lowest):
1. Selected talk group in emergency state.
2. Default emergency group in emergency state.
3. Selected talk group.
4. Emergency capable group in emergency state
5. Priority 1 talk group.
6. Priority 2 talk group.
7. Other (non-priority)
7.23.2.1 Changing Scanning Priority
Follow this procedure to set talk groups in the current profile as the Priority 1 or Priority 2
talk group:
1. Use to scroll through the menu until “Priority1” or “Priority2” appears in the
bottom line of the display (Priority1 group has higher priority than the Priorty2 group.
The talk group currently set as the priority talk group appears in the top line of the
display.
2. Use to select a new priority talk group.
3. Press the MENU button to set the newly selected talk group as the priority talk group.
7.24 MAKING SELECTIVE CALLS
Selective calling is a feature that allows two radio units to obtain and utilize an
independent voice path for a private call. Radios can be configured to both initiate and
receive selective calls or to only receive selective calls.
In the OpenSky system, a source radio can be configured to initiate selective calls through a
pre-programmed list in memory. This method uses the “speed dial list” set up by the
OpenSky network administrator and provisioned as part of the registration process.
NOTE
Selective calls are terminated if an emergency is declared. The network
limits selective calls to ten (10) minutes maximum.