User's Manual

H-7YCPD0002-0 EDITION 1
49
Presets are saved and restored to/from non-volatile memory. Changing the User ID (login in
as a different user) will clear the presets since they are stored on a per-user basis.
Changing control heads will not recall presets for the previous control head.
NOTE
Preset button C can be configured via programming to reboot the radio into
a particular application mode. Contact your system administrator to
determine if this feature is enabled in your radio.
7.29 DYNAMIC REGROUPING
Dynamic regrouping requires that the network administrator determine which radio users
should be formed into an impromptu talk group to respond to particular emergency
conditions.
The administrator will edit the personalities of the affected radios to include an emergency
profile and then page the affected radios to re-register with the network to receive their
edited personalities.
In response, affected radios automatically re-register to receive their edited personalities.
During re-registration, subscriber equipment will default to the emergency profile selected
by the administrator.
7.30 GPS COORDINATES
The radio‟s current latitude and longitude coordinates may be displayed using the “GPS”
menu. The following procedure assumes a GPS antenna is connected to the radio and it is
receiving adequate signals from GPS satellites:
1. Press until the “GPS” menu appears in the bottom line of the display. Current
GPS coordinate latitude and longitude data continuously scrolls in the top line of the
display in a degrees:minutes:seconds format.
2. Use to change to another menu.
NOTE
If the internal GPS receiver‟s data is expired (30 minutes or more) or
unavailable, the radio uses the serving base station‟s coordinates [GPS (Site)
is displayed]. The GPS Menu will also indicate if the data is aged (2 minutes
or more) [GPS (Aged) is displayed]