User's Manual

H-7YCPD0002-0 EDITION 1
66
9.2 MESSAGES
During radio operation, various messages are displayed on either line 1 or line 2. Typical
messages include control channel status information, such as system busy or call denied, or
messages associated with the radio's operation, (i.e. volume adjust). These messages are
described as follows:
Table 9-2: Display Messages
MESSAGE
NAME
DESCRIPTION
TALKAR
ND
Talk-around
Indicates the radio is operating on conventional channels in
talk-around mode (no repeater).
VOL=31
Volume Level
Indicates the current volume level. The volume level
display ranges from OFF (silent) to 31 (loudest).
UNKNOW
N
Caller's ID Not
Received
Indicates that an individual call is being received, but the
caller's ID was not received.
T99 ON
Type 99
Decode ON
Indicates the Type 99 Decode feature is enabled.
T99 OFF
Type 99
Decode OFF
Indicates the Type 99 Decode feature is disabled.
PA ON
Public Address
ON
Indicates that the public address function of the radio is
enabled.
PA OFF
Public Address
OFF
Momentary (2 seconds) indicates that public address
function of the radio was disabled.
ALRM ON
External
Alarm Enabled
Indicates that the external alarm function of the radio is
enabled.
ALRM
OFF
External
Alarm
Disabled
Momentary (2 seconds) indicates that the external alarm
function of the radio was disabled.
NO KEY #
Encryption
Key Missing
Flashing indicator indicates that no encryption key or an
incorrect encryption key is programmed into the radio.
BCKL=1-6
Backlight
Indicates the display intensity and keypad backlight level.
GR
Group ID
Indicates that the call is a group call and is followed by the
GID of the caller.
MENU
Displayed when the menu key is pressed and remains
displayed in line 1 until a menu item is selected.
SYS=1-64
System = 1 - 64
The system number for the current base station of the
system displayed in line 1. It is displayed in line 2 of the
display. Press the system key to obtain this display.
SEL PHN
Select Phone
After pressing the PHN key, selecting an entry from the
phone list by typing the entry number will display this
message on Line 1.