User's Manual
5-69
5.4.4 Selection of Other Ships
The cursor in Graphic display can move with key or key.
When key is pressed, ships are selected by descending order of the setting SORT.
When key is pressed, ships are selected by ascending order of the setting SORT.
5.4.5 Auto Range Setting
After “AUTO RANGE” is set “ON” (valid), this function works under the condition shown below.
On condition that Graphic range set previously is smaller than the ship’s distance selected in the
list (located within 24NM), and then press DISP key and displays the Graphic screen.
The range is set automatically and is adjusted to its distance. Therefore the ship selected can be
confirmed in the Graphic display.
e.g.㧕If the Graphic range is set 0.75NM previously and A ship which is 4.85NM away from own ship is
selected in the list, the progress is shown below.
The range is changed 0.75NM into 6.0NM.
DISP key
or
.+56 51464#0)'
$4)
c
40)
0/
'6
O
KP 0#/'
0+*10
,4%
$#5'
)4#2* 40) 0 72
,4% /#47
*&)
c
51) MP
%1)
c
)4#2* 40) 0 72
,4%
$4)
c
40) 0/
*&)
c
51) MP
%1)
c
)4#2* 40) 0 72
,4%
$4)
c
40) 0/
*&)
c
51) MP
%1)
c