User's Manual

3-2
                                 ԩ
                                      ԧ
       Ԩ
                                        ԥ
       Ԧ
       ԣ
  
                           
  
ԣ
POWER/DATA1 connector
Connect to power supply, sensor and external equipment by using controller cable or connect to
connection box (option).
Ԥ
AIS transponder connector
Connect to AIS transponder by a coaxial cable.
ԥ
GND terminal
Connect to Ship ground.
Ԧ
DATA2 connector
Connect to sensor and external equipment by data cable. Or connect to the optional connection box.
ԧ
Pilot Plug
Connect to PC for Pilot by Pilot cable.
Ԩ
LAN connector
Connect to LAN network.
When performing maintenance, connect to PC.
ԩ
Dip switch for terminator
When external sensors are connected in parallel, perform the terminator setting.
=====================
Serial number label (Upper side)
Indicates the own serial number and AIS equipment number.
Ԥ