User's Manual
5-48
2. DIMMER
Select 2.DIMMER, DIMMER adjustment screen is displayed.
(The cursor move to the right of ”MAXIMUM”.)
The dimmer is adjusted for each pressing of DIM key, and these levels are defined by 4 stages (MAX,
TYPICAL, MIN, OFF). In this menu, The value of MAX, TYPICAL, MIN can be set. And set the
increasing value in case of alarm.
When the cursor is on the right of “MAXIMUM”,
the value can be adjusted. Press key or
key to adjust it and press ENT key and then the
cursor moves to the right of “TYPICAL”.
The value of MAXIMUM㧘TYPICAL and
MINIMUM can be set between 1 to 13.
e.g.㧕If “MAXIMUM” value is set to 9, the “TYPICAL” value can be set less than 9. The "MINIMUM" value
is set to a value below the "TYPICAL" value as shown in the above example.
The ALARM value can be set between +1 to +9.
In the case of an alarm, the current dimmer
setting is altered by the value set here.
As shown in the above example, when a value of 7 is set for TYPICAL, then the dimmer value is set to
9 during the alarm condition.
3. SCREEN SAVER
Select 3.SCREEN SAVER, SCREEN SAVER setting menu is displayed.
In this menu, the time to turn off the LCD light after no operation condition can be set.
Select from OFF or ON.
If there is no need for this function, Select
“OFF” with key or key and press ENT key,
and then TIMER value is changed into “00”
automatically.
&+//'4
&+//'4
/#:+/7/
6;2+%#.
/+0+/7/
#.#4/
&+//'4
&+//'4
/#:+/7/
6;2+%#.
/+0+/7/
#.#4/
5%4''0 5#8'4
5%4''0 5#8'41((
6+/'4
OKP
Ť