Instruction Manual

Operation
4-10
5
5
5
.
.
.
Press ENT after finished the steps above.
Then saved the memory channel number
and the cursor moves to the next number.
When registering other channels or revising
existing lines, repeat the steps 2 - 5 above.
- The above procedures are for registering a channel in an empty line. However
editing an existing memory channels is as well.
- To delete a registered memory channel, select CL at step 2 of the procedure above.
(2) Communicating on a memory channel
Memory channels will be available e.g. when setting a working channel for subsequent communication
after initial contact on CH16.
■ Procedure ■
1
1
1
.
.
.
Press FUNC Î 3 .
The 7.3.1 Memory CH list will be displayed as
shown at right.
2
2
2
.
.
.
Move the cursor to the desired list number
and press ENT using the jog dial, or press
the memory channel number (two digits) by
numeric keys directly.
In this example, if selected the memory channel
number 05, CH P002 will be set.
Note
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01(ITU)
07.
7.3.1)Memory CH list
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01(ITU)
07.
MEM
CALL
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
02
CH P0
CH70
CH
SW
SQL