Instruction Manual

Operation
4-64
(2) Receiving a call from another controller
■ Procedure ■
1
1
1
.
.
.
If received an intercom call, the screen at
right will be displayed, and the ringing tone
will sound.
If not answer within 30 seconds, the screen will
revert to the previous screen.
2
2
2
.
.
.
When answering to the call, lift the
handset and start the communication.
¾ Press PTT key to talk.
¾ To finish the intercom, place the handset
back on hook.
- The OCC mark will remain displayed
even while talking, because the called
controller (recipient) is in monitor mode.
- While using the intercom function between
two of controllers, if the other controllers
are connected, those screens will display
as shown at right.
Intercom mode
State: Receiving a call
from: Station2
Intercom mode
State: Connected
Note
Intercom mode
State: Busy