Instruction Manual

Operation
4-66
Coast sta no answer. OK
After the PSTN call, there is no answer
from the coast station.
Confirming channel free... Cancel
To send the DSC call (routine calls or
test), confirming if the CH70 is free, or
waiting until the CH70 becomes free.
Data updating... -----
Updating the AIS information.
DISTRESS call starts in Xsec -----
Detected keeping the DISTRESS
key held down, and the distress call will
be sent in X seconds.
DISTRESS pressed by xxxxxxxxxx and starts
in Xsec
-----
The DISTRESS key of xxxxxxxxxx
has been held down now, and the
distress call will be sent in X seconds.
Erase all data? OK/ Cancel
Is it ok to erase every station data of
this station list?
OK: Erases all data.
Cancel: Ceases this operation.
Erase this number? OK/ Cancel
Is it ok to erase this station data?
OK: Erases this station data.
Cancel: Ceases this operation.
Invalid address OK
The DSC calling address is empty or
invalid.
Invalid TEL number OK
The recipient telephone number for a
PSTN call is empty or invalid.
Invalid value OK
An invalid value is detected during a
process of a task.
Invalid work CH OK
The work channel data for the DSC call
is empty or invalid.
Is it OK to break PSTN mode? OK/ Cancel
Pressed the CANCEL key during
PSTN communication mode. Is it ok to
break?
OK: Breaks the PSTN mode.
Cancel: Continues the PSTN mode.
Left without operating...
This process will be canceled soon.
-----
This process will be canceled in 1 min
and returns to the status display
condition because the controller has
been left for 9 min without operating.
Lost the radio receiving signal. OK
Lost the carrier receiving at the work
channel during the PSTN mode, and
breaks the communication.
No signal detected in the Work-CH. OK
The transceiver shifted to the specified
work channel to start the PSTN
communication, but cannot detect the
carrier from the coast station.
Now continuing DISTRESS call mode.
Break this mode?
Continue/ Break
Pressed the CANCEL key during the
distress call mode. Is it ok to break?
Continue: Continues the distress mode.
Break: Breaks the distress mode.
OK to "sleep" this no access right controller? Sleep/ Cancel
Pressed the DIM + PWR keys at
this controller without the access rights.
Is it ok to enter the sleep mode?
Sleep: Enters the sleep mode.
Cancel: Ceases this operation.