Instruction Manual

Maintenance & Inspection
6-6
6.3.2 Viewing the alarm history
The following describes the procedure to confirm the current alarm condition or the alarms occurred in past time.
■ Procedure ■
1
1
1
.
.
.
Press the MENU key, and through hierarchical
menus, select the 8.2 Alarm information.
According to the alarm occurring condition, the screen
will be displayed as shown at right.
The displayed alarm information is formatted as follows.
[Alarm Number], [Popup Information]
2
2
2
.
.
.
To check the alarm history, press ENT.
After the popup screen at right will be displayed, select OK.
3
3
3
.
.
.
The alarm history will be displayed.
The latest up to 10 histories are stored.
If necessary, scroll with the jog dial.
The displayed alarm history is formatted as follows.
[Number] [Alarm and Recovery Date and Time] [Alarm Number]
[A: Alarm/V: Recovery] [Popup Information]
8.2)Alarm information
No data
Press ENT to view alarm history.
8.2)Alarm information
'06-12-31 23:59
001,TRCVR high temp
004,WKR PLL unlock
Press ENT to view alarm history.
View alarm history?
[ OK ] [Cancel]
Alarm history
1.'06-12-31 23:59 001 A
TRCVR high temp
2.'06-12-31 23:59 004 A
WKR PLL unlock
3.'06-11-25 06:33 000 V
TRCVR VSWR
Note
Note
8.2)Alarm information
001,TRCVR high temp
004,WKR PLL unlock
Press ENT to view alarm history.
(In the case of alarms occurring)
(In the case of no current alarm)