Instruction Manual

Options Operation
10-1
10. OPTIONS OPERATION
10.1 Handset connection box (NQE-1845/ 1846/ 1847)
There are three types of handset connection boxes: a waterproofed flush mount type for a wing console
(NQE-1845), a waterproofed wing installation type (NQE-1846) and an indoor flush mount type (NQE-1847).
CAUTION
Close the water-resistant cap of the waterproof type handset box after use. Rain and sea
breeze could cause connector malfunction. Also do not leave the handset above deck.
■ Procedure ■
1
1
1
.
.
.
In the case of the waterproof type, remove the water-resistant cap.
2
2
2
.
.
.
Connect the handset (NQW-261) to the connector.
3
3
3
.
.
.
Turn ON the switch to start communications.
The access right will be obtained by turning on this switch.
(This switch is equivalent to hook switch of the handset.)
・ Always turn off the switch when not in use.
・ Even if the switch is turned on, while another controller with higher priority will be in use,
the access right will not be obtained.
Waterproofed
wing installation type
（NQE-1846）
Indoor flush mount type
（NQE-1847）
Note
1
2
3
1
2
1
2
3
1. Connector
2. Switch
3. Waterproof cap
Waterproofed
flush mount type
for wing console
（NQE-1845）