Instruction Manual
Table Of Contents
Operation
4-4
4.2.2 Turning OFF the power
■ Procedure ■
1
1
1
.
.
.
Press the key and the DIM key
simultaneously.
After that, the power-off process is activated
according to the controllers' situation.
When using only one controller
Select the desired item below on the displayed popup
screen at right.
・ [OK]: Turns off the power.
・ [Cancel]: Returns to the previous screen.
When using two or more controllers
Select the desired item below on the displayed popup
screen at right.
・ [OK]: Turns off the power.
・ [Sleep]: Sets the controller to sleep mode.
・ [Cancel]: Returns to the previous screen.
In sleep mode, the controller becomes the following conditions.
・ Only the controller is powered off.
・ The ALM lamp turns green to indicate that the controller is in sleep mode,
・ When receiving a distress call, the controller will be automatically turned on and
activate the alarm if the Wake-up setting in an installation menu is ON,.
・ Even if set the controller with access right to the sleep mode, the access right
will not move from the controller.
Note
PWR
CONT