Instruction Manual

Operation
4-12
4.2.9 Changing the channel region
This menu sets the channel region to ITU, USA, Canada, or Inland Waterway.
■ Procedure ■
1
1
1
.
.
.
Press the MENU key, and through
hierarchical menus, select the 7.6 Region.
2
2
2
.
.
.
Move the cursor to the desired line and
press ENT using the jog dial, or press a
numeric key directly.
When selected the USA channel, the screen will
become as shown at right.
When set to the Inland Waterway (IWW), changed a few functions as follows.
- Enabled the ATIS function automatically and sends the ATIS code over the
voice channel when releasing the PTT key. Also, if pressed the PTT key
continuously, sends the ATIS code every five minutes automatically.
- Disabled the scan or dual watch functions.
- When operating the DSC menus, a popup screen will be displayed to notice that
the DSC usage is not allowed on Inland Waterways.
7.6)Region
1.ITU channel [ITU]
2.USA channel [USA]
3.Canada channel [CAN]
4.Inland channel [IWW]
0.Back
Note
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
CH
CH70
16
[USA]
SQL
CH
SW