Instruction Manual

Operation
4-14
4.3 Basic DSC operations
When calling stations, the DSC is also available for a routine/ safety/ urgency or a distress call in
addition to the calling by radiotelephone described above. This section describes the procedures for
basic DSC routine calls and for the AIS-linked DSC calls.
4.3.1 Routine calls to a coast station
A DSC call to a coast station is initiated as follows.
■ Procedure ■
1
1
1
.
.
.
Press the MENU key, and through
hierarchical menus, select the 1.1 Coast
station call.
The address inputting screen will be displayed.
If entered previously, the address will be
appeared as a default value.
2
2
2
.
.
.
Press ENT to display the alphabetically
sorted coast station list. After selecting the
initial letter and pressing ENT, select the
desired coast station with the jog dial.
- This list can be registered in the
menu 9.4.1 Coast station list.
- When inputting the MMSI
manually, press the CANCEL
key to return to the previous
screen and input it using the
numeric keypad.
3
3
3
.
.
.
After inputting the address, press ENT.
Confirm the address.
4
4
4
.
.
.
If the address is correct, press ENT.
The sending confirmation screen will appear.
The controller displays by default only
the edited information in the call setup
as shown at right.
1.1)Coast station call
Address :[00 ]
[
OK
]
[
Cancel
]
1.1)Coast station call
Address :[001234567]
[
OK
]
[
Cancel
]
1.1)Coast station call
Address :001234567
[
Call
]
[
Cancel
]
Note
Note
Coast station list [A]
NAME MMSI
Argentina
Australia
Azerbaijan
Bolivia
Bangladesh
001234567
002222222
003333333
004444444
005555555
Select the initial of the name.
ABCDEFGHIJKLMNOP
Q
RSTUVWXYZ