Instruction Manual

Operation
4-16
4.3.2 Routine calls to a ship station
A DSC call to a ship station is initiated as follows. This procedure is similar to that of menu 1.1 Coast
station call but also needed to input a working channel.
■ Procedure ■
1
1
1
.
.
.
Press the key.
The menu shown at right will be displayed.
If entered previously, the address will be
appeared as a default value.
2
2
2
.
.
.
Press ENT to display the alphabetically
sorted ship station list. After selecting the
initial letter and pressing ENT, select the
desired ship station with the jog dial.
- The list can be registered in the
menu 9.4.2 Ship station list.
- When inputting the MMSI manually,
press the CANCEL key to return
to the previous screen and input it
using the numeric keypad.
3
3
3
.
.
.
Press ENT.
The cursor will move to the Work CH.
4
4
4
.
.
.
Press ENT and input the working channel.
- The free channel will be searched
and displayed automatically.
- If required, input another channel
manually using the CANCEL
key, the jog dial or the numeric
keys.
- If there is no free channel, a blank
will be shown as a search result.
5
5
5
.
.
.
Press ENT.
Confirm the entered contents.
1.2)Ship station call
Address :[ ]
Work CH :[ ]
[
OK
]
[
Cancel
]
1.2)Ship station call
Address :[123456789]
Work CH :[ ]
[
OK
]
[
Cancel
]
1.2)Ship station call
Address :[123456789]
Work CH :[06]
[
OK
]
[
Cancel
]
Note
1.2)Ship station call
Address :[123456789]
Work CH :[06]
[
OK
]
[
Cancel
]
DSC
RTN
Ship station list [A]
NAME MMSI
AAA ocean
ABB ocean
ACC ocean
ABC ocean
BBB ocean
123456789
222222222
333333333
444444444
555555555
Select the initial of the name.
ABCDEFGHIJKLMNOP
Q
RSTUVWXYZ
Note