Instruction Manual

Operation
4-34
5
5
5
.
.
.
Press ENT to transmit the call.
After completed the transmission, the popup
screen shown at right will be displayed to wait
the acknowledgement.
If received no response for 5 minutes,
the screen will return to the step 3
mentioned above.
6
6
6
.
.
.
When received the acknowledgement,
the screen shows the message with the
alarm for 3 sec. Then changes to the
working channel (CH16) automatically.
- If 9.5.2 Automatic CH shift is OFF,
lifting the handset or pressing ENT is
required to set the working channel.
- The specific alarm for urgency sounds
and notifies the receiving of the
acknowledgement.
7
7
7
.
.
.
The station call will be completed after
displayed the working channel as shown
at right.
Start communications using the handset.
When completed the communications, return
the handset to the cradle.
If the called ship or coast station is unable to comply with the call, own station (caller)
may receive a negative acknowledgement with the reason mentioned above. In this
case, if possible according to the message, wait and retry the calling again later.
2.2.2)Specific station
Address :123456789
Work CH :71
[
Call
]
[
Cancel
]
Waiting for
Acknowledgement.
[Cancel]
Note
Note
Note
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
16
CH
SQL
CH70
CH
SW
[ITU]
Received urgency message
Format :Individual ACK
From :123456789......
Type :All modes RT...
Work CH :16.............
EOS :ACK BQ.........
Station1 TIME 23:59(UTC)
16
CH70
Press CANCEL to silence alarm.
CH
[ITU]