Instruction Manual

Operation
4-36
6
6
6
.
.
.
Press ENT to transmit the call.
All ships call needs no response and will be
completed after displayed the popup screen as
shown at right. Lifting the handset or pressing
ENT erases the popup screen, and enables to
start the communication.
If the handset has been left in the
off-hook condition in advance, skip
to step 7 below without showing the
popup screen at right.
7
7
7
.
.
.
Start the urgency broadcasting using the
handset.
When completed the communications, return
the handset to the cradle.
4.4.2.4 Receiving an urgency call
When receiving an urgency call from a coast or another ship station, the message will be displayed
immediately with the specific alarm for urgency calls. Then treat the message according to the type as
below.
(1) Receiving an all ships call
■ Procedure ■
1
1
1
.
.
.
The screen at right will be displayed, and the
alarm will sound growing louder gradually.
The example message contains the following
information.
- Format: All ships call
- Caller’s MMSI: 111222333
- Type: All modes radiotelephone
- Work Channel: CH16
- EOS: End of sequence.
When containing additional information
regarding Medical TRNSP or Neutral
ship, the Subject line will be added.
2
2
2
.
.
.
Press the CANCEL key to stop the
alarm, and display the screen at right.
Received urgency message
Format :All ships call
From :111222333
Type :All modes RT
Work CH :16
EOS :EOS
Press CANCEL to silence alarm.
Received urgency message
Format :All ships call
From :111222333
Type :All modes RT
Work CH :16
EOS :EOS
[OK/Listen] [Cancel]
Note
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
16
CH
SQL
CH70
CH
SW
[ITU]
Note