User's Manual

Maintenance & Inspection
6-5
6.3 System alarm indication
This equipment displays alarms as follows when an internal or external error is detected.
- To return to the previous screen after the alarm is displayed, press the
CANCEL key.
- When the TRX 024.PLL unlock or WKR MODEM 030.PLL unlock alarm is
occurring, that mark remains as shown below until the equipment is restored
to normal conditions.
Alarm information
PA :001,Overcurrent(A)
PA :008,High-temp
TEL ITU- 401
4357.0
4065.0
RX kHz
TX kHz
NonDST: +
DROBOS: +
EdtDST: +
ID 431001234 23:59(UTC)
Pos 89ﾟ59.0123'N
179ﾟ59.6789'E@23:59 (EXT)
SIG
WKR scan bands:
Unlock
Unlock
Note