User's Manual

Names and Functions
2-1
2. NAMES AND FUNCTIONS
2.1 Controller (NCM-2150)
The controller parts and their functions are described below.
1. Internal loud speaker
2. Jack for telegraph in continuous wave (CW) mode
3. Black and white liquid crystal display unit
4. Numeric keypad (10-key) and function keys
In addition to entering numeric values, when combined with the
FUNC key, the keys have the following functions.
･ TEL ··· Sets TEL mode with the last or default frequency.
･ DSC ··· Sets DSC mode with the last or default frequency.
･ CW ··· Sets CW mode with the last or default frequency.
･ 1CLAR ··· Displays the setting screen for the clarifier.
･ 2SCAN ··· Displays the scan menu.
･ 3NR ··· Displays the setting screen for noise reduction.
･ 4ATT ··· Displays the setting screen for attenuation.
･ 5AGC ··· Displays the setting screen for automatic gain control.
･ 6SP ··· Turns speaker on or off.
･ 7PRN ··· Prints the specified screen.
･ 8TEST ··· Displays the self-diagnosis menu.
･ 9 ··· Switches Tx power between high, medium and low.
･ 0 ··· Displays the DSC test call menu.
･ FUNC ··· Enables 10-key functions or changes an active screen.
1
4
5
14 6 7 8 9 10 11 12 13
2
3
15
16
PWR
RDC
TEST
CALL