Instruction Manual

2-4
①
②
③
④
⑤
⑥
① Liquid Crystal Display (LCD) Panel
②
Sends a distress call.
③ Transmit/Receive lamp
Red: Lights when a distress or emergency
call is being sent or received.
Green : Lights when a normal call is being
sent or received.
④ ,
Sets the JSB-196/196GM to the designated
frequency and F1B mode.
⑤
・ Stops the call if pressed while a call is being sent.
・ Turns off the alarm lamp and cancels the buzzer if
pressed when a call is being received.
・ If you press this key followed by the , the
software version is displayed and the set navigation
aid/radio equipment is momentarily displayed. (This
is not the initial setting process.)
⑥
Press after editing a message to start
Transmission of the message.
⑦ to ,
・ When editing, these keys enter the indicated
numbers.
・ If you press the key followed by
to and , the following operations are
performed:
SCAN: Alternately starts and stops scanning
when using the JSB-196/196GM to scan
the receive frequencies.
DIM Adjusts the LCD and key brightness in
four steps.
PRINT: Prints the current mode operations. In
"DSC watching" mode, this key selects
"PRINTMENU."
QUIT: Quits editing and returns to the higher
mode (MENU, etc.).
POS: When selecting "WORK FREQUENCY"
and "POSITION" when editing a
message, this key switches to
"POSITION".
FREQ: When selecting "WORK FREQUENCY"
and "POSITION" when editing a
message, this key switches to "WORK
FREQUENCY".
SAVE: Saves edited data and returns to the
higher mode (MENU, etc.).
⑧
Enters key input and selected items.
⑨
When pressed in "DSC watching" mode, the
screen switches from "MENU#1" to "MENU#2"
to "DSC watching", in that order.
⑩
Press this key to select the functions indicated in
blue.
⑪
Horizontal: Use to selectively display received
messages and to select the
contents when editing messages.
Vertical: Use to scroll the display and to
move the screen pointer vertically.
⑫
・ Deletes data that has been keyed in.
・ Enters the initial value when entering "POSITION"
or "WORK FREQUENCY."
⑬ Watch-keeping receiver channel
Lights the channel scanned by the watch-
keeping receiver. 2187.5kHz and 8414.5kHz are
fixed and cannot be switched.
⑦ ⑧⑨⑩
⑪⑫⑬
1st : PRESSTOVERI FY&EDI TMESSAGE
1st : PRESSTOVERI FY&EDI TMESSAGE1st : PRESSTOVERI FY&EDI TMESSAGE
1st : PRESSTOVERI FY&EDI TMESSAGE
2nd: PRESS&HOLDUNTILBEEPSOUNDS
2nd: PRESS&HOLDUNTILBEEPSOUNDS2nd: PRESS&HOLDUNTILBEEPSOUNDS
2nd: PRESS&HOLDUNTILBEEPSOUNDS
CONTI NUOUSLYTOTRANSMI T
CONTI NUOUSLYTOTRANSMI TCONTI NUOUSLYTOTRANSMI T
CONTI NUOUSLYTOTRANSMI T
5
DISTRESS
6
9
2187.5kHz 8414.5kHz
ENT
MENU
STOP
FUNC
FUNC
CALL
9
0
.
CLR
FUNC
1
11
1
9
6
1
2
3
4
NCT-196N DSC/NBDP MODEM