Instruction Manual

3-11
3.4.2.5 Scanning reception
The reception frequency stored in user channel group 1 to 10, each 20 channels can be scanned.
You can select a desired group (20 user channels per group) for scanning.
Procedure Examples of display on the LCD
Example of group 7.
1. Press , then turn the Jog Dial until
"SCAN" appears in the channel field of the
LCD.
(in the TEL mode)
2. Press .
"Group 1 1" appears in the channel field of
the LCD.
3. Turn the Jog Dial until objective group is
displayed.
4. Press .
Scanning reception starts.
appears on the center left of the LCD.
The group name and number which are
scanned are displayed in the channel field of
the LCD.
5. To cancel scanning, press . The last
communication mode and the frequencies
are set.
RX FREQ
KHz
TX FREQ
KHz
SCAN
NR
AGC
RDY
TUNE
,
,,
, .
..
.
,
,,
, .
..
.
ENT
MENU
ENT
SCAN
CLR