Instruction Manual
3-40
DISTRESS CALL Transmissible
Address :XXXXXXXXX
Nature :UNDESIGNATED DIST
Dist-position :12゚34’N123゚45’E
Dist-UTC :01:20
Dist-telecomm :J3E TEL
End of sequence :EOS
Call TX/RX freq :2,187.5 / 2,187.5 kHz
Use
and
to
scroll the screen.
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
, and then press
.
The "DISTRESS CALL" screen is displayed.
The following items have been set in this example.
*
「
Address
」:
XXXXXXXXX
「
Nature
」:
UNDESIGNATED DIST
「
Dist-position
」:
12
゚
34’N123
゚
45’E
「
Dist-UTC
」
:
01:20
「
Dist-telecomm
」
:
J3E
TEL
*
「
End of sequence
」
:
EOS
「
Call TX/RX freq
」
:
2,187.5/2,187.5
kHz
* Not edit the these setting.
●
Entering the respective items:
After selecting each item, press
to confirm the selection.
(1) Nature
Dist-telecomm: Use the and keys to select the items.
(2) Dist-position: Use the and keys to determine the direction, and then input the
ship's position using the numerical keys ( to ).
(3) Dist-UTC: Use the numerical keys ( to ) to enter the time.
(4) Call TX/RX freq: Use the and keys to select one of the preset frequencies, or use
the numerical keys ( to ,and ) to specify a frequency directly.
2. Press
for at least 3.5 seconds (until the intermittent alarm tone changes to
a continuous tone).
The following screen is displayed and the message is transmitted. The same distress message is sent 5
times in succession.
On completion of the transmission, the following screen is displayed. Transmission of the distress call is
repeated when the displayed time has counted down to zero.
Press to cancel the DISTRESS transmission.
To store the message without sending it, press (SAVE).
To discard the message and quit without sending it, press (QUIT).
The distress call is sent repeatedly until a distress call acknowledgement is received.
3 ENT
ENT
0 9
0 9
DISTRESS CALL
Transmitting
TX frequency
:
2,187.5
kHz
TX date&time
:
06.Sep.2001(Thu) 01:30
1/5
DISTRESS CALL
2,187.5 kHz
NEXT DISTRESS CALL
:
AFTER
3.7
min
DISTRESS
FUNC
9
FUNC 4
STOP
▲
▼
Note
Note
0 9 .