Manual

3-66
SETUP Select no.
1. Date&time edit
2. Position edit
3. Calling frequency registration
4. Address registration
5. Distress setup
6. Others alarm setup
7. Automatic acknowledgement setup
8. Scanning setup
9. Watchkeeping receiver setup
CALLING FREQUENCY REGISTRATION (TX/RX)
[1] 12,345.6/12,356.7 kHz ( )
[2] NONE / NONE kHz ( )
[3] NONE / NONE kHz
( )
[4] NONE / NONE kHz ( )
[5] NONE / NONE kHz ( )
[6] NONE / NONE kHz ( )
Use and to
scroll the screen.
Use and to
scroll the screen.
(2) Useful Functions
The NCT-196N register up to six party addresses with a shorthand name, and up to six calling frequencies.
The registered contents are retrieved by using and when compiling a call message, obviating the need to
enter numbers.
The addresses and calling frequencies are stored from the "SETUP" screen. See steps 1 to 3 of (1) Specifying the
scanning frequency" for how to display the "SETUP" screen.
●
Registering a calling frequency
Procedure
1. From the "SETUP" screen, press , and then press .
The "CALLING FREQUENCY REGISTRATION (TX/RX)" screen is displayed.
2. Enter the "Transmit frequency/Receive frequency (name)" for each channel.
・
Enter the transmit frequency/receive frequency pair using to and .
・
Enter (name) as follows: 1. Selecting characters: Use and to select characters inside the
parentheses ().
2. Confirming characters: After selecting each character, press .
To go to the next channel or skip to the next channel without specifying a name, press two times.
3. On completion of entering the data, press , and then press (SAVE).
Press to tune the tuner and then return to the "SETUP" screen.
Press to abort tuning and return to the "SETUP" screen.
Press to delete registered calling frequency.
Press , and then press (QUIT) to cancel this menu.
3 ENT
0 9 .
ENT
ENT
Tune regist frequency?
[ENT] key
：
TUNE
[STOP] key
：
NO TUNE
9
FUNC
ENT
STOP
▲
▼
▲
▼
FUNC
4
Note
CLR
Note