Manual

3-73
WATCHKEEPING RECEIVER SETUP
CH1. 2187.5kHz
：
ON
（
const
）
CH2. 4207.5kHz
：
ON
CH3. 6312.0kHz
：
OFF
CH4. 8414.5kHz
：
ON
（
const
）
CH5. 12577.0kHz
：
OFF
CH6. 16804.5kHz
：
ON
Use and to
scroll the screen.
● WATCHKEEPING RECEIVER SETUP
This procedure sets the Watch-keeping receiver's scanning frequency. The 2187.5kHz and 8414.5kHz frequencies
are preselected; here, frequencies are selected for the other four channels.
The "DISTRESS FREQUENCY" lamps (on the front panel) are turned ON/OFF for each set channel. The lamps for
2187.5kHz and 8414.5kHz are always ON.
Procedure
1. From the "SETUP" screen, press and then press .
The "WATCHKEEPING RECEIVER SETUP" screen is displayed.
2. Select "ON" or "OFF".
・ The default setting is "ON". Use and to change the setting.
・ Press to confirm the setting.
The corresponding lamp for that frequency is turned ON or OFF according to the setting.
3. On completion of entering the data, press , and then press (SAVE).
Operation returns to the "SETUP" screen.
Press , and then press (QUIT) to cancel this menu.
9 ENT
ENT
9
FUNC
▲
▼
FUNC
4
Note