Manual

3-105
3.8.7 Setting the DIP Switch
Set the DIP switch to select a language, character set, or particular function.
ATTENTION
Before beginning the procedure, be sure to turn the power OFF.
Failure to do so may cause electrical shock, malfunction or injury.
Just after printing, the temperature of the printer head is high. Do not touch the printer head
until the temperature goes down.
Doing so may cause burns or injury.
Do not touch any part of the cutter.
Doing so is potentially dangerous and may cause injury.
Procedure
1. Open the printer cover, remove the ribbon cassette cartridge, and move the
printing head manually to the right end.
・The printing pressure increases in numerical order (
①→⑥
).
・To open/close the printer cover, refer to "7.3 Opening/Closing the Printer Cover".
・To remove the ribbon cassette cartridge, refer to "7.5 Replacing the Ribbon Cassette Cartridge".
2. Hold the tip of the partition cover and slide it to the left to remove it.
The DIP switch appears.
Note