Instruction Manual

6-12
f. Output the message from an external port
The data of currently open message text can be output
with connection the external equipment (ECDIS, MPD).
1) Press the * key. The sub screen appears.
2) Select the “[DATA OUT]”, and press the ENT key.
3) Select the port which outputs message data.
- SEL-DATA OUT: The message data is outputted
from a "DATA OUT" port.
- SEL- DISP OUT: The message data is outputted
from a "DISP" port.
4) “ARE YOU SURE?” is displayed. Select the “[OK]”,
and press the ENT key. (“NOW OUTPUTTING...” is
displayed on the sub screen.)
To return to the sub screen (SET UP), select
“[CANCEL]” and press the ENT key.
5) After message outputting has been completed,
press the ENT key or the CLR key.
- To stop outputting, press the CLR key while outputting.
IA01 518 15 31/12/05 18:20
JAPAN NAVTEX N.W. NR 1260/2005
KEIHIN KO, TOKYO EAST PASSAGE.
DAYTIME DAILY UNTIL 08 JULY 2006
.
AREA BOUDED BY
35-35-37.9N 139-47-18.4E
35-34-58.9N 139-48-08.6E
35-34-53.9N 139-48-03.1E
35-35-02.0N 139-47-55.3E
35-35-32.3N 139-47-16.6E
35-35-35.0N 139-47-15.1E
35-33-37.9N 139-46-18.4E
35-33-58.9N 139-46-16.6E
35-33-32.3 N 139-45-16.6E
35-35-35.0N 139-44-15.1E, WGS-84
.
LINE: 10/ 18
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT
*DATA OUT*
ARE YOU SURE?
[OK] [CANCEL]
*DATA OUT*
DATA OUT OK
[OK] [CANCEL]
*DATA OUT*
[SEL-ECDIS OUT]
[SEL-DISP OUT]
[CANCEL]
Procedures
Notes