Instruction Manual

6-32
6.3.2 Receiving message type settings (MESSAGE TYPE SETTING)
To display MESSAGE TYPE SETTING menu screen, select 2. MESSAGE TYPE SETTING.
The items of the receiving message type selection screen are as follows;
- FREQUENCY: Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)).
- SELECT ALL: Select all the messages from A to Z.
: A message is received.
: A message is not received.
- Receiving message A – Z : Select receiving message from A to Z
Navigational warning [A], Meteorological warning [B], Search and rescue information/piracy and armed
robbery [D], Navigational warning (additional) [L] are obliged to receive a message. These message
types setting cannot be changed.
a. Select receiving message types
Start with selection of "FREQUENCY".
Carry out the procedure from section 3) to 5) of p.6-28 “a. Select receiving stations”.
b. Cancel settings
Carry out “b. Cancel settings” of p.6-29.
c. Save (ro Clear) settings
Carry out the procedure from section 1) to 4) of p.6-30 “d. Save (or Clear) settings”.
Fig.6-9 MESSAGE TYPE menu screen
MSG TYPE ⅩⅠ
FREQUENCY:RX1(518K)
SELECT ALL
A:NAV WARNINGS N:[SPARE]
B:MET WARNINGS O:[SPARE]
C:ICE REPORT P:[SPARE]
D:SERCH & RESCUE Q:[SPARE]
E:MET FORECAST R:[SPARE]
F:PILOT SERVICE S:[SPARE]
G:DECCA T:[SPARE]
H:LORAN U:[SPARE]
I:[SPARE] V:SPECIAL
J:SATNAV W:SPECIAL
K:OTHER NAVAID X:SPECIAL
L:NAV WARNINGS Y:SPECIAL
M:[SPARE] Z:NO MESSAGES
Notes