Instruction Manual

6-33
6.3.3 DISPLAY setting menu (DISPLAY SET)
To display DISPLAY SET menu screen, select 3.DISPLAY from MAIN MENU (6.3).
Display form, a buzzer, etc. can be set up on this screen.
1. Press the ▲ ▼ key to select the menu item.
2. When ENT key or key is pressed, the menu screen of selected item is displayed.
- When cursor is on the item 1-4 and 6, cursor moves to the right side of ":"
- When cursor is on the item 5, the menu screen of item 5 appears.
- To return to the MAIN MENU screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":" of item 1-4 and 6, cursor returns on the
item 1-4 and 6. (1.CONTRAST, 2. DIMMER, ....)
The outlines of menus are as follows;
1. CONTRAST: Adjust the contrast of this display. (See 6.3.3.1)
2. DIMMER: Set up the brightness level of this display. (See 6.3.3.2)
3. BUZZER: Select buzzer ON/OFF. (See 6.3.3.3)
4. LOCAL TIME: Input local time. (See 6.3.3.4)
5. USER KEY SETTING: Assign the often used function for the USER key (See 6.3.3.5)
6. POS/TIME DISP.SET: Set up the display of the POSITION/TIME screen. (See 6.3.3.6)
Fig.6-10 DISPLAY SET menu screen
DISPLAY SET ⅩⅠ
1.CONTRAST : 10
2.DIMMER
- MAXIMUM : 10
- TYPICAL : 6
- MINIMUM : 2
3.BUZZER : ON
- ALARM MSG : ON
(FOR MESSAGE TYPE:A,B,L)
- RECEIVED MSG : ON
- NAVTEX ALARM : ON
- CLICK : ON
4.LOCAL TIME : ON
(TIME DIFFERENCE): -11:59
5.USER KEY SETTING
6.POS/TIME DISP.SET(1):POS
(2):TIME/NAV
Procedures
Notes