Instruction Manual

6-45

SELF DIAGNOSIS LOG

ⅩⅠ

9.RESULT 29/06/05 12:34

ROM[1][2] :NG

RAM :GOOD

SIO[1][2][3] :NG

PS :GOOD

ANTENNA CHECK :GOOD

518KHZ OVER ALL TEST:GOOD

490KHZ OVER ALL TEST:GOOD

4209.5KHZ OVER ALL TEST:GOOD

b. The diagnosis of LCD panel (LCD DIAGNOSIS)

1) Select 2.LCD DIAGNOSIS, and press the ENT key. Cursor moves to the right side of ":".

2) Press the ▲ ▼ key and select the following items;

START: Diagnosis is started.

CANCEL: Diagnosis is canceled, and cursor returns to 2.LCD DIAGNOSIS.

3) Select the “START”, and press the ENT key.

This diagnosis blinks the viewing area (White -> Black -> White-> ...).

c. Self diagnosis log (SELF DIAGNOSIS LOG)

1) Select 3.SELF DIAGNOSIS LOG, and press the ENT key. SELF DIAGNOSIS LOG screen appears.

The newest result is displayed on this screen.

2) To display the next old result, press the ▼ key. (Up to last 10 results)

The diagnosed time is displayed when external GPS receiver is connected.

”--/--/-- --:--“ is displayed when time is not able to be acquired. (External GPS receiver is not connected.)

To print a result to the external printer, press the * key

in order to display the sub screen.

Select the “[PRINT OUT]”, and press the ENT key.

Printing is started.

To stop printing, press the CLR key while printing.

To return to the SELF DIAGNOSIS screen, select the

“[CANCEL]” and press the ENT key.