Instruction Manual

6-49
6.3.5.4 Port monitor (PORT MONITOR)
Select 4.PORT MONITOR, and press the ENT key. PORT MONITOR screen appears.
Select the port for monitoring. It can check whether data is normally outputted from the port.
In addition, the displayed data can be stored temporarily to be rechecked.
1. Press the ▲ ▼ key in order to select the items.
2. When the ENT key is pressed, the menu screen of selected item appears.
Pressing the key can display the same.
- When cursor is on the item 1, cursor moves to the right side of ":"
- When cursor is on the item 2, the menu screen of item 2 appears.
- To return to the MAINTENANCE screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":" of the item 1, cursor returns on the item
1. (1.PORT SELCTION)
The outlines of menus are as follows;
1. PORT SELECTION: Select the port to check the serial in/output data. (See a. The check of
in/output data)
2. PORT LOG: The data stored temporarily is displayed. (See c. Port log)
Fig.6-18 PORT MONITOR screen
PORT MONITOR ⅩⅠ
1.PORT SELECTION: OFF
2.PORT LOG
Notes
Procudure