User Manual

- 67 -

• When saving the scan result into the CF memory with the remained memory less than

2 MB, this product displays the error “Insufficient CF memory volume” and stops the

data saving. When the error appears, delete unnecessary data in the memory and

perform the data saving again. Or change the memory to an other memory with enough

volume and perform the data saving.

• When using the CF memory with the remained memory more than 2 MB, and when

saving the scan result which volume is larger than the available memory of the CF

memory, this product displays the error “Writing Error” and stops the data saving. But

the data file is created in spite of stopping the data saving. Delete the file created after

the error appears. (You cannot recall and display the scan result in the file created after

the error appears.)

• This product saves the depth correction constant used at scanning. Even when

changing the depth correction constant after completing the scan, the saved depth

correction constant is the setting used at scanning. (When overwriting and re-saving

the recalled scan result to the CF memory, the depth correction constant used at

scanning is saved.

3.7 CF Control Screen

When not scanning, when the 12 CF key is pushed, the screen is switched to the CF control

screen. Once at the CF control screen, thumbnail image display can be viewed. Also, data storage, data

erasure, and initialization for the CF memory can be executed.

To return to the measurement screen, press the 12 CF key.

All of the functions of the CF control screen are shown below.

• The maximum number of files displayed on the CF control screen is 8000. When the

files beyond 8000 each are stored into the CF memory, some files are not displayed on

the screen. (In this case, an error message “The number of files exceeds 8000. There

are some files which cannot be displayed on the screen.” appears.

• When the large volume of files is stored in the CF memory, the switch to the CF control

screen takes time. (The scan screen is displayed during switching to the CF control

screen.)

For example, when 8000 each of files are stored in the CF memory, it takes 5 seconds

to switch the mode to the CF control screen. (case of CF memory: Transcend

TS1GCH80)

Notes