User Manual

- 68 -
3.7.1 Displaying the thumbnail images of saved data
When a file is selected at the CF control screen using the ▲▼ cursor keys, scan results can
easily be displayed on the display area. (See Figure 3-22.)
The thumbnail display enables an easy check on saved image data.
When Monochrome1 or Monochrome2 is set to the disp.color setting on the setting
screen, the thumbnail image display will also be monochrome.
• The thumbnail displays a part of the selected file (Distance direction; around 0.5 m, depth
direction: around half of the display range). The image processing selected at the image
processing setting is applied to the thumbnail image
.
3.7.2 Reading saved data
To read the data that has been saved, select the file to be read by using the ▲▼ cursor keys on
the CF control screen, select Load using the
keys and press the 5 ENTER key.
The screen changes to the scan screen, the screen is scrolled, and the selected data is opened.
The data read is finished when the screen stops scrolling.
If there is data that has not been saved or data read from the CF memory on the scan screen
prior to switching to the CF control screen, a message “Data that has not been saved will be erased
– Yes/No” is displayed. Select Yes using the keys and press the 5 ENTER key to
open the file. When No is selected and the 5 ENTER key is pressed, operation returns to the
CF control screen. (See Figure 3-22.)
Figure 3-22 Reading Saved Data
Select “Yes” by using
the
key and
press the 5 ENTER
key.
An example where there is data
that has not been saved or data
opened from CF on the scanning
screen
If there is not any data or data
opened from CF on the scanning
screen
Select "Read" and press
the 5 ENTER key.
The screen scrolls while data is
being read.
Notes