User Manual

- 15 -
(5) Sensitivity display
Displys the sensitivity setting. See Section 3.3.2 Sensitivity switching for the method to
switch sensitivity.
(6) Cursor marker
Displays the position of cursor markers. See Section 3.3.3 Cursor operation for how to
display and erase the cursor marker.
(7) Cursor coordinates
Displays the coordinates of the cross point of the cursor described in the item (4)
above. The distance moved is shown in the X field and depth in the Y field.
(8) Distance gauge
Displays the distance gauge in the direction the scan is performed. This gauge
displays the distance this product has moved.
(9) Battery meter
Displays the remaining power in the battery pack.
(10) Display range
Displays the display range set at the parameter setting screen. See Section 2.3.11
disp. range for the method to set the display range.
(11) Cursor marker coordinates
Displays the coordinates of the cursor marker described in the item (6) above. Below
each of the marker numbers, the movement distance (X) is shown in the first row and the
depth (Y) is shown in the second row.
The movement distance value is displayed with truncating 0.5mm order. Therefore
when the least significant number is 2 or 7, treat it as 25 or 75, respectively.
Example: when the cursor marker coordinate X = 1.002, the actual marker coordinate
is 1.0025.
(12) Image processing display
Displays the selected image processing which is performed to the scan results. See
Section 3.4 Image processing for more details.
(13) External data output display
Displays the selected external data output (output destination) set at the parameter
setting screen. See Section 2.3.10 External data output for how to use the external data output.