User's Manual

Chapter 1 INSTALLATION
1
Chapter 1 INSTALLATION
1-1 OVERVIEW
The proper installation of the radar equipment is critical in ensuing its effective and
reliable performance as well as facilitating maintenance and repair. Carefully install the
radar equipment by following the procedures below.
■ Install the scanner as high as possible while taking the scanner's weight into consideration.
■It is preferable to install the display unit in the wheel house to facilitate observations.
■Available cable lengths and types for installing the radar JMA-1030 are as shown in the table
below. Request an appropriate cable from JRC beforehand.
A cable longer than the sufficient length may degrade radar performance, so give it careful
consideration when planning the installation.
10-m cable is the standard configuration.
Power Cable CFQ-9900 2m
STANDARD SUPPLY
CFQ9924-5 5m ( 8core) *Option
CFQ9924-15 15m (8 core ) *Option
CFQ9924-20 20m (8 core ) *Option
CFQ9924-30 30m (8 core ) * Option
Installation cable
TYPE CFQ9924- 10 Length 10m (8core) STANDARD SUPPLY
EXTERNAL SIGNAL INPUT
POWER INPUT 10.8V to 31.2V
Installation cable Length 10m