User's Manual

Chapter 1 INSTALLATION
10
1-2-5 POWER CABLE INSTALLATION
This radar includes 2m power cable, which radar side was already ended with connector.
Cable assembly name: CFQ-9900
The cable’s core color is white (+), black (-) ,shield mesh + green (frame ground).
Wire : AWG16
The fuse box is built into the cable (white line side).
In the case of fuse brown, please carry out exchange insertion of the same rate thing.
(Fuse: 58V/7.5A)
Red : +12/24V
Black : -0V
Shield + green: FG (frame ground)
Please connect power supply cable terminals using crimper firmly.
When you directly connect with the ship's power supply without
using the optional rectifier, measure the voltage between the hull's
earth and the positive side of ship's power supply, and the hull's
earth and the negative side of this. And check voltage of 38 volts
or more is not required.
If voltage of 38 volts or more is required, take the measures which
do not require 38 volts or more between the above mentioned
terminals.
Connection without taking the measures causes system failure or accident.
■ Connecting the cable to the display unit
Connect the CFQ-9900 connector to the Display "Power Input" firmly.
CAUTION